Features:
1. 3D cameras alignment based on the car and not influenced by the platform.
2. Measurement system equipped with double digital cameras and four target disk, supplying revolutionary measurement mode.
3. There is no electronic component, so the wheel alignment will not have a component failure problem.
4. Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration
5. Measurement progress no need to compensate for steel ring, the precise eccentric compensation will be just once pulling or pushing the car back and forth
6. Software system Easy to operate, complete conventional basic parameters within two minutes, significantly faster than conventional aligners
7. Easily maintenance, download and upgrade freely for the model data
Measurement and readings:
1. Toe/Camber/ Caster/S.A.I (or KPI)
2. Thrust Angle/Chassis wheelbase/wheel track/Rolling Radius/Set-Back
| Measure Items |
Measure Accuracy Range |
Measure Range |
| Display Precision |
0.1mm/0.01° |
|
| Toe |
±0.01° |
±40° |
| Camber |
±0.01° |
±45° |
| Caster |
±0.02° |
±45° |
| S.A.I |
±0.02° |
±45° |
| Set Back |
±0.01° |
±40° |
| Thrust Angle |
±0.01° |
±40° |
| Steering Angle |
±0.02° |
±50° |
| Track Width |
±2mm |
1219mm-2438mm |
| Wheelbase |
±2mm |
2006mm-4572mm |
Standard configuration
| Computer host |
1 Set |
| Displayer |
32-inch |
| Camera |
1 Set/2 pcs |
| Pillar |
1 Set |
| Cabinet |
No cabinet, 1 set keyboard tray |
| Camera Beam |
1 Set |
| Clamp/Target |
1 Set/4pcs |
| Turntable |
1 Set/2pcs |
| Hanger |
1 Set/4pcs |
| Mouse/Keyboard |
1 Set |
| Eccentric screw and ground pin |
1 Set |
| Transitional Block |
1 Set/2pcs |
| Steering Wheel & Brake Lock |
1 Set |
| Wedge-shaped Pad |
1 Set/2pcs |
| Printer |
Optional |
